Intel 1.40 GHz RH80532NC017256 数据表
产品代码
RH80532NC017256
Mobile Intel
®
Celeron
®
Processor (0.13 µ) in
Micro-FCBGA and Micro-FCPGA Packages Datasheet
28 Datasheet
298517-006
4. I
CCx
,
max
specifications are specified at V
CC
static (typical)
derived from the tolerances in Table 12 through Table
19, V
CCT
,
max
, Tjmax, and under maximum signal loading conditions.
5. Based on simulations and averaged over the duration of any change in current. Use to compute the maximum
inductance and reaction time of the voltage regulator. This parameter is not tested.
6. Maximum values specified by design/characterization at nominal V
CC
and V
CCT
.
7. V
CCx
must be within this range under all operating conditions, including maximum current transients. V
CCx
must
return to within the static voltage specification, V
CCx
,
DC
, within 100
µs after a transient event.
8. VID leakage current is < 100 µA for VID voltages under 3.0 V.
9. Typical V
9. Typical V
CC
indicates the VID encoded voltage. Voltage supplied must conform to the load line specification
shown in Table 12 through Table 19.
10. Voltages are measured at the processor socket pin for the Micro-FCPGA part and at the package ball on the
Micro-FCBGA part.
11. This specification applies only to the Ultra Low Voltage Mobile Intel Celeron Processor.
Table 12. V
CC
Tolerances for the Low Voltage Mobile Intel Celeron Processor: VID = 1.15 V
V
CC
(V)
Static Transient
I
CC
(A)
Typ Min Max Min Max
0.0 1.150 1.125
1.175
1.105 1.195
1.0 1.146 1.121
1.171
1.101 1.191
2.0 1.142 1.117
1.167
1.097 1.187
3.0 1.138 1.113
1.163
1.093 1.183
4.0 1.134 1.109
1.159
1.089 1.179
5.0 1.130 1.105
1.155
1.085 1.175
6.0 1.126 1.101
1.151
1.081 1.171
7.0 1.122 1.097
1.147
1.077 1.167
8.0 1.118 1.093
1.143
1.073 1.163
9.0 1.114 1.089
1.139
1.069 1.159
10.0 1.110 1.085 1.135 1.065 1.155
11.0 1.106 1.081 1.131 1.061 1.151
12.0 1.102 1.077 1.127 1.057 1.147
13.0 1.098 1.073 1.123 1.053 1.143
14.0 1.094 1.069 1.119 1.049 1.139
15.0 1.090 1.065 1.115 1.045 1.135