Waterford Appliances EMERALD E63-NG1 用户手册

Waterford E63-1 EMERALD Freestanding Gas Stove

19

10) Remove all 8 screws holding the burner

tray assembly in place.

11) Carefully lift the burner tray assembly out.

12) To replace the burner tray assembly, simply

reverse these instructions.

13) Remove two (2) thermopile wires.

14) Remove thermocouple with a 9 mm (metric)

wrench.

15) Remove pilot nut with an 11 mm wrench.

16) Remove valve to orifice nut with a 5/8"

wrench.

17) Remove inlet pipe with pipe wrench. Note

orientation of 90

o

 elbow.

18) Remove two (2) phillips head M5 screws on

each side of the valve.

19) Remove valve and remove gas out 90

o

brass fitting. Note orientation of fitting.

1) To install a new valve assembly, reverse

instructions for removing valve.  See
assembly steps 1-12.

2) Check for leaks and manifold pressure. See

Gas Pressure Test  instructions.

3) To reinstall valve, reverse instructions for

removing valve assembly, steps 13-19.