Beck, R&J ELECTRIC ACTUATORS FOR INDUSTRIAL PROCESSCONTROL 11-1_9 用户手册
15
INSTALLATION
SAFETY PRECAUTIONS
WARNING
Installation and service instructions are for
use by qualified personnel only. To avoid
injury and electric shock, do not perform any
servicing other than that contained in this
manual.
use by qualified personnel only. To avoid
injury and electric shock, do not perform any
servicing other than that contained in this
manual.
STORAGE INFORMATION
The drive should be stored in its shipping carton
in a clean, dry area.
If it is necessary to store the drive outdoors for
a long period of time, it should be removed from
its shipping carton and stored above ground. A
waterproof cover should be securely fastened
over it. Do not stack drives on top of one another.
Stored drives should be periodically checked to
make sure no condensation has formed in the
control compartments. Damage due to moisture
while in storage is not covered by warranty.
its shipping carton and stored above ground. A
waterproof cover should be securely fastened
over it. Do not stack drives on top of one another.
Stored drives should be periodically checked to
make sure no condensation has formed in the
control compartments. Damage due to moisture
while in storage is not covered by warranty.
UNPACKING
Beck drives are packed in standardized
cardboard shipping containers. Drives mounted
on valves are strapped to a skid and crated. After
unpacking, the wooden platform may be used to
transport the drive to the installation site.
on valves are strapped to a skid and crated. After
unpacking, the wooden platform may be used to
transport the drive to the installation site.