Beck, R&J ELECTRIC ACTUATORS FOR INDUSTRIAL PROCESSCONTROL 11-1_9 用户手册

72

DCM-2 SERIAL INTERFACE

 

Command

torqconst n

torqenable n

Description

Assigns the count value to be 
associated with the torque span.  This 
number is unique to each drive.

Enables or disables the torque 
measurement feature of the drive.

Argument n and Information

 = the torque span value in counts.  

This number is determined during 
manufacture and is noted on a tag 
affixed to the drive body within the 
electronics compartment.

 = "0" (disabled) or "1" (enabled).

Command

signals

stat

tempf

torq

Description

Displays the present Position signal 
of the drive in volts and the Demand 
signal in milliamps. 

Displays information on the status of 
the drive, including:
  Time / Date
  Demand (% and settings)
  Position (% / inches)
  Error (%)
  Stepsize (inches / %)
  Deadband (inches / %)
  Motor Status
  Run Time
  Line Frequency
  Starts (ext./ret./total)
  Reversals/Stalls
  Overloads
  Positive & Negative Peak Load (%)
  Positive & Negative Peak Torque 
    (% /  inches) 
  Extend and Retract Inhibit Setting
  Alarms

Displays measured temperatures in the 
drive (°F.):
  Low extreme 
  Present temperature
  High extreme

Displays the drive's present torque 
measurement as a percentage of rated 
torque.

Argument n and Information

No argument.

No argument.

No argument.

No argument.