Whirlpool WDT710PAYH 快速安装指南

Select UL Listed/CSA Approved twist-on wire connectors rated to 
connect your power supply cord to 16-gauge dishwasher wiring.

Remove the green grounding screw and place through the ring 
terminal of the green ground wire. Reattach and tighten the green 
screw.

NOTE: Do not pre-twist stranded wire. Twist on wire connector. 
Gently tug on wires to be sure both are secured.

Connect wires black to black and white to white, using UL 
Listed/CSA Approved twist-on wire connectors.

If needed, see website for animated representation of this step. 
Visit www.whirlpool.com/electrical under FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. 
Make sure wires are tucked inside box. Close cover ensuring 
wires are not pinched. Use 

¹⁄₄" nut driver or Torx

®

 T20

®

 screwdriver 

and previously removed screw to secure cover.
NOTE: Do not plug into outlet until instructed to do so.