Whirlpool WDT710PAYH 快速安装指南

Your dishwasher has leveling legs. The following provides 
instructions to adjust the leveling legs to set the dishwasher to the 
correct height for your cabinet opening. 

Measure height of cabinet opening from underside of countertop 
to floor where dishwasher will be installed (you will need to 
measure the lowest point on the underside of the countertop and 
the highest point on the floor). Refer to “Dishwasher Height 
Adjustment Chart” to adjust the leveling legs.

NOTE: If the minimum cabinet opening height is less than 
34" (86.4 cm), the rear leveling legs can be removed for additional 
clearance. This will allow the dishwasher to fit into a 33

⁷⁄₈" (86 cm) 

high cabinet opening, but the dishwasher will be more difficult to 
move. (Measurements are approximate. Rear and front leveling 
legs are preset at the factory for 34

¹⁄₂" [87.6 cm].)

Turn front and rear leveling legs to the same height. Refer to 
“Dishwasher Height Adjustment Chart.”