GSI Outdoors Commercial Direct Gear Drive Bin Sweep Auger PNEG-1521 用户手册

28

PNEG-1521     Commercial Direct Gear Drive Bin Sweep Auger

E. Place the Bearing Stand Assembly onto the

Connecting Shaft.

C.   Fasten the first section of Sweep Flight to the

U-Joint Flight Shaft with two (2) 5/8" x 4" Grade 8
bolts and Stover nuts. Make sure that the
Dura-Edge side of the Sweep Flight faces the
center of the Bin.

D. Next, bolt the 2" OD x 11-½” Connecting Shaft to

the Sweep Flight with two (2) 5/8" x 4" Grade 8
bolts and Stover nuts.

U-Joint

Flight Shaft

5/8” Stover Nuts

5/8” x 4” Grade 8 Bolts

Sweep

Flight

Assembled

Sweep Flight

5/8” x 4” Hex Bolt

5/8” Stover Nut

Connecting

Shaft

Bearing Stand Assembly

Connecting Shaft