Hunter Engineering Quick Tread 规格说明表单
Quick Check Drive Under with Quick Tread
Flush Mounted
Drive Under Quick Check and Flush Mount Quick Tread
Installation
(shown with optional monitor)
SENSOR
HEIGHT:
10 FT.
OPTIONAL
PEDESTAL
LOCATION
15 ft.
RECOMMENDED BAY
WIDTH
OVERALL FOOTPRINT
For inspection information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/findrep.cfm
For general inquiries visit:
www.hunter.com
or call
800 448-6848
Continued on Page 2
Form 6898-T, 05-15a
Copyright © 2015, Hunter Engineering Company
QUICK TREAD COMMUNICATION CABLES (UP TO 75 ft.)
4 in.
93 in.
(7 ft. 9 in.)
51 in.
END OF BAY
TO FRONT
WHEEL STOP:
120 in.
165 in.
(ACCOMMODATES
VEHICLES WITH
MAXIMUM OF
165 in.
WHEELBASE.)
RECOMMENDED
BAY LENGTH
28 ft. 4 in.
Site Specifications
Power Requirements
115/230v, 15 amp
*
50/60 Hz 1 ph
Ɨ
Air Supply Req. (IS Units)
90-150 PSI (6.2-10.3 bar)
Approximate Air
Consumption
25 SCFM @ 90 PSI
(648 Lpm @ 6.2 bar)
Substructure Specifications
Refer to Form 6905-T
Pedestal Location
36 - 96 in. (914 - 2438 mm) from QT1F
Product Specifications
Max. Wheel Weight
3500 lb. (1588 kg) per wheel
Test Entry Speed
2 to 8 mph (3-13 km/h)
Shipping Weight
Quick Check Cabinet
290 lbs (132 kg)
Quick Check Drive Under
Sensor
316 lbs (143 kg)
Quick Tread
1723 lbs (455 kg)
*
Amperage shown is minimal circuit rating.
Ɨ
Isolated ground recommended.