Hunter Engineering Quick Tread Foglio Delle Specifiche
Quick Check Drive Under with Quick Tread
Flush Mounted
Drive Under Quick Check and Flush Mount Quick Tread
Installation
(shown with optional monitor)
SENSOR
HEIGHT:
10 FT.
OPTIONAL
PEDESTAL
LOCATION
15 ft.
RECOMMENDED BAY
WIDTH
OVERALL FOOTPRINT
For inspection information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/findrep.cfm
For general inquiries visit:
www.hunter.com
or call
800 448-6848
Continued on Page 2
Form 6898-T, 05-15a
Copyright © 2015, Hunter Engineering Company
QUICK TREAD COMMUNICATION CABLES (UP TO 75 ft.)
4 in.
93 in.
(7 ft. 9 in.)
51 in.
END OF BAY
TO FRONT
WHEEL STOP:
120 in.
165 in.
(ACCOMMODATES
VEHICLES WITH
MAXIMUM OF
165 in.
WHEELBASE.)
RECOMMENDED
BAY LENGTH
28 ft. 4 in.
Site Specifications
Power Requirements
115/230v, 15 amp
*
50/60 Hz 1 ph
Ɨ
Air Supply Req. (IS Units)
90-150 PSI (6.2-10.3 bar)
Approximate Air
Consumption
25 SCFM @ 90 PSI
(648 Lpm @ 6.2 bar)
Substructure Specifications
Refer to Form 6905-T
Pedestal Location
36 - 96 in. (914 - 2438 mm) from QT1F
Product Specifications
Max. Wheel Weight
3500 lb. (1588 kg) per wheel
Test Entry Speed
2 to 8 mph (3-13 km/h)
Shipping Weight
Quick Check Cabinet
290 lbs (132 kg)
Quick Check Drive Under
Sensor
316 lbs (143 kg)
Quick Tread
1723 lbs (455 kg)
*
Amperage shown is minimal circuit rating.
Ɨ
Isolated ground recommended.