Weslo WLHS27080 业主指南
2
Remove the cover from the spa. Remove all water from
the spa (see the userÕs manual that came with your spa
for instructions on how to drain the spa).
the spa (see the userÕs manual that came with your spa
for instructions on how to drain the spa).
Position the two support brackets as shown in drawing 1.
Take note that there is a small sticker with an arrow on
each support bracket. The arrow must be pointing
towards the power pack or jet pack of the spa. Note: The
support brackets are not identical. Make sure you
have positioned the brackets exactly as described
above.
Take note that there is a small sticker with an arrow on
each support bracket. The arrow must be pointing
towards the power pack or jet pack of the spa. Note: The
support brackets are not identical. Make sure you
have positioned the brackets exactly as described
above.
When the support brackets are in the correct positions,
slide them down between the inflatable liner and the outer
shell (cordura or wood panels) as shown in drawing 2.
The support brackets should be centered over the exist-
ing buckles on the spa shell. WARNING: Take great care
to avoid damaging the inflatable liner.
slide them down between the inflatable liner and the outer
shell (cordura or wood panels) as shown in drawing 2.
The support brackets should be centered over the exist-
ing buckles on the spa shell. WARNING: Take great care
to avoid damaging the inflatable liner.
Unfold the tent and place it on the floor with the sleeves
on the inside facing upward. Unfold and assemble the
four tent poles just like outdoor tent poles.
on the inside facing upward. Unfold and assemble the
four tent poles just like outdoor tent poles.
Insert all four poles into the sleeves on the inside of the
tent. Note: The four poles are identical. Turn the tent over,
so the poles are now on the side facing the ground.
tent. Note: The four poles are identical. Turn the tent over,
so the poles are now on the side facing the ground.
Note: The following steps are best performed by two
persons. Position the tent over the spa. Take note that
on one side the tent has two buckles hanging from straps.
These buckles must be on the opposite side of the spa
from the power pack.
persons. Position the tent over the spa. Take note that
on one side the tent has two buckles hanging from straps.
These buckles must be on the opposite side of the spa
from the power pack.
1
1. Stay off the Steam Chamber at all times; it is
not designed to support weight.
2. Always keep children away from the Steam
Chamber and the spa. If the children are
under the cover, they cannot be seen.
under the cover, they cannot be seen.
3. Always keep the screens open during use to
allow for proper ventilation and to prevent the
temperature under the Steam Chamber from
reaching dangerous levels.
temperature under the Steam Chamber from
reaching dangerous levels.
4. Always tie the screen covers down when the
screens are open (tie-downs are mounted
inside the Steam Chamber).
inside the Steam Chamber).
5. Limit the time spent in the spa to 30 minutes
or less when the Steam Chamber is in use.
6. The Steam Chamber is NOT a safety cover.
7. Failure to follow all instructions, including the
instructions found in your spa manual, may
result in injury or drowning.
result in injury or drowning.
8. Lock the Steam Chamber in the folded-down
position when it is not in use.
WARNING: Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
property damage sustained by or through the use of this product.
To reduce the risk of serious injury, read the following precautions and
all instructions in this manual before using the Steam Chamber.
all instructions in this manual before using the Steam Chamber.
WARNING:
Setting Up the Steam Chamber
Left Support Bracket (1)
Right Support Bracket (2)
Buckle
Buckle
Inflatable
Liner
Liner
Right
Support
Bracket (2)
Support
Bracket (2)
Outer
Shell
Shell
Power
Pack