Weslo WLHS27080 业主指南

3

5

6

Folding down the Steam Chamber. When not in use,
the spa tent should be folded down. To do this, simply lift
up the tent pole closest to the power pack. Fold the tent
all the way over, away from the power pack. 

Unhook the two buckles from the spa shell. Wrap the
webbing around the folded tent and hook the buckles into
the buckles on the inside of the tent. Always lock the
buckles to prevent unauthorized use of the tent. The
spa cover can now be placed over the spa and hooked
up normally (see the spa manual for instructions).

Folding Up the Steam Chamber. To fold up the tent, first
remove the spa cover. Unlock and unhook the buckles
holding the tent in place. Unfold the tent all the way and
hook the two buckles on the tent into the buckles on the
spa shell. Note: The spa cover cannot be installed while
the spa tent is in the unfolded position.

Upper,

Inside

Pivot

Upper, Outside

Pivot

Lower,

Outside Pivot

Lower,

Inside

Pivot

Power

Pack on

this side

4

Upper,

Inside

Pivot

Upper, Outside

Pivot

Lower,

Inside

Pivot

Lower,

Outside

Pivot

Buckle

Buckle

Pocket

Cover (8)

Power

Pack

Power

Pack on

this side

Start with the Right Support Bracket. It is on the side of
the spa where the power pack is to the right of the sup-
port bracket, as shown in drawing 3. 

Press the socket on each tent pole onto one of the pivots
on the support bracket. Note: It is very important that
each pole is mounted on the correct pivot. Follow the
sequence below:

¥ The tent pole that is first, counting from the power pack,

goes onto the upper, inside pivot.

¥ The tent pole that is second, counting from the power

pack, goes onto the upper, outside pivot.

¥ The tent pole that is third, counting from the power

pack, goes onto the lower, outside pivot.

¥ The tent pole that is fourth, counting from the power

pack, goes onto the lower, inside pivot.

Note: When mounting the poles on the other side of the
spa, follow the exact same sequence described above,
although the support bracket is a mirror image, as shown
in drawing 4.

After the poles are mounted on the support brackets, clip
the two buckles hanging from the tent onto the buckles
already mounted on the spa shell, as shown in drawings
5 and 6.

Place the black bag containing weights in the pocket
located on the inside of the tent over the power pack of
the spa (see drawing 5). Re-fill the spa with water.