Wyse vx0le conversion to thinos 用户手册
4
Chapter 2
Figure 2
Wyse Simple Imager console
3. Select V12 in the Select Product list, and then click Add to open the Add Image dialog
box.
Figure 3
Add Image dialog box
4. Use the following guidelines:
•
Product - V12 is automatically entered (leave this value).
•
Image Version - Enter Conversion for Image Version. This refers to the new
Firmware version.
Firmware version.
•
Flash Size - This is the amount of flash memory installed in your cloud client. Flash
Size can be 128, 256, 512, 1024, 2048.
NOTE: To determine the flash size of your cloud client (location of the flash size is
as follows):
Size can be 128, 256, 512, 1024, 2048.
NOTE: To determine the flash size of your cloud client (location of the flash size is
as follows):
·
V30LE: Start > Control Panel > System > System Info tab
·
V50LE: Start > Control Panel > System > System Information > Identity tab
·
V90LE and V90LEW: Start > Control Panel > System > Client Information >
General tab
General tab
Tip
See your cloud client documentation for help on viewing the flash size.
•
Description - Enter what you want for your information. This information will help
you identify the characteristics of the device for which you are using this image.
IMPORTANT: Be sure to use only Alphanumeric characters (A through Z and 0
through 9), underscore (_), or spaces.
you identify the characteristics of the device for which you are using this image.
IMPORTANT: Be sure to use only Alphanumeric characters (A through Z and 0
through 9), underscore (_), or spaces.
•
Image File - Click Browse, navigate to the folder on your hard drive that contains
the 1V12.i2d file (this is the location you selected in "Step 2: Copy the 1V12 Folder
and 1V12.i2d File (on the DVD-ROM) to Correct Locations"), click on the 1V12.i2d
the 1V12.i2d file (this is the location you selected in "Step 2: Copy the 1V12 Folder
and 1V12.i2d File (on the DVD-ROM) to Correct Locations"), click on the 1V12.i2d