Wyse vx0le conversion to thinos 用户手册

Converting Wyse VX0LE to ThinOS

file to select it (you may need to select the All Files option from the Files of Type box
to display the 1V12.i2d file for selection), and then click Open.

Caution

Do not use the 1V12.i2d file directly from the Conversion Software Assembly
DVD-ROM.

Figure 4

Browse to select 1V12.i2d file

5. After you have completed configuring the Add Image dialog box, click OK. After the

image file has been successfully added, the success message appears.

Figure 5

Image successfully added

6. Click OK. The firmware image now appears in the Wyse Simple Imager console and is

ready to be submitted.

7. Select the firmware you added in the Select Firmware list and click Submit. After the

image file has been successfully submitted, the Please start/restart the client to start
imaging message appears.

Caution

Do not close the console until after the cloud client is successfully imaged
with the new firmware.

Figure 6

Start/Restart the client to start imaging

8. Click OK.

9. After the Log window appears, start the cloud client. After the imaging process is

complete, the Log window will display the log messages and the final status. If the
imaging was successful, a Success message will be displayed. If it failed, it will display
an error message (see "Troubleshooting").