Wilson Electronics 271245 用户手册

9

The power light PWR will turn green 
when the amplifi er is successfully 
powered up.  When the 800 MHz or 
1900 MHz lights are lit green, the 
amplifi er is amplifying the outside 
signal.

If one or both frequency lights turn 
red, oscillation is occurring and the 
amplifi er has powered down.  The 
outside antenna needs to be moved 
farther from the inside antenna.  Move 
the outside antenna on the roof of 
the car to the rear of the car, but at 
least 8-12 inches from the rear or 
side windows.  Remove power from 
the amplifi er and reinstall power - this 
resets the amplifi er.

If the lights are now green, the 
oscillation has stopped and the 
amplifi er is working.  If the red light is 
still on, move the antenna farther away 
and repeat the process.

Always use a magnet-mount or roof-
mount antenna.  Do not use a glass-
mount antenna, as oscillation may 
cause  continuous shut-down of the 
amplifi er.

An amber light in either the 800 
MHz or 1900 MHz position indicates 
overload from the cell site.  The 
amplifi er has temporarily shut down 
and will automatically reset.