Roland BR-600 用户手册
16
Re
v0.10
v0.10
Panel Descriptions
fig.00-050
Input section
GUITAR/BASS/MIC2 dial
This dial adjusts the input sensitivity for the GUITAR/
BASS and MIC2 inputs.
BASS and MIC2 inputs.
MIC1 dial
This dial adjusts the sensitivity for MIC1 and the onboard
stereo mic.
stereo mic.
PEAK indicator
This indicator shows how strong the input level is at the
various input jacks (e.g., GUITAR/BASS, MIC2, and MIC1).
various input jacks (e.g., GUITAR/BASS, MIC2, and MIC1).
This indicator lights at a level -6 dB lower than where sound
distortion occurs. Adjust the input sensitivity with the
GUITAR/BASS/MIC2 dial so that this indicator lights only
occasionally, at those moments when you play your guitar
(or other instrument) at its loudest.
distortion occurs. Adjust the input sensitivity with the
GUITAR/BASS/MIC2 dial so that this indicator lights only
occasionally, at those moments when you play your guitar
(or other instrument) at its loudest.
REC LEVEL (Recording Level) dial
Use this dial to adjust the volume of the input source for
recording.
recording.
* If you use the REC LEVEL dial to turn down the volume of
the input source during recording, the sound will be
recorded in the audio track at a low volume, so that noise
will be more apparent when you raise the volume of the
audio track for playback.
recorded in the audio track at a low volume, so that noise
will be more apparent when you raise the volume of the
audio track for playback.
If you want to lower the sound of the input source that you
are monitoring, lower the volume with the MASTER fader.
To change the volume of the music being played back, use the
TRACK fader for the respective tracks.
are monitoring, lower the volume with the MASTER fader.
To change the volume of the music being played back, use the
TRACK fader for the respective tracks.
I
Front Panel
1
8
2
3
4
5
6
7
1
Try to record at the highest volume possible before the
sound begins to distort. This works to improve the
quality of the sound and reduce noise. When you want
to lower the volume used while checking the sound, use
the MASTER fader to lower the volume.
sound begins to distort. This works to improve the
quality of the sound and reduce noise. When you want
to lower the volume used while checking the sound, use
the MASTER fader to lower the volume.
BR600_e2 16 ページ ２００６年４月１７日 月曜日 午前９時３分