Roland BR-600 用户手册
190
Re
v0.10
v0.10
Adjusting the Display Contrast
Depending on where the BR-600 is situated, the display
contents may be difficult to read. If this is the case, perform
the procedure given below to adjust the contrast (1 to 17).
contents may be difficult to read. If this is the case, perform
the procedure given below to adjust the contrast (1 to 17).
fig.06-010
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SYS,” and press [ENTER].
fig.06-020
3
Press CURSOR [
] [
] to select “LCD Contrast,”
and adjust the contrast with the TIME/VALUE dial.
fig.06-030
4
After completing the adjustment, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
processed.
If you press and hold [UTILITY] while turning the
TIME/VALUE dial, you will be able to change the
contrast in real time. Choose the method that best suits
the BR-600’s setup.
TIME/VALUE dial, you will be able to change the
contrast in real time. Choose the method that best suits
the BR-600’s setup.
BR600_e2 190 ページ ２００６年４月１７日 月曜日 午前９時３分