Roland BR-600 用户手册
Re
v0.10
v0.10
191
Section 6
Using a Foot Switch or Expression Pedal
You can connect a sold separately foot switch (such as the
BOSS FS-5U or Roland DP-2) or expression pedal (such as
the Roland EV-5 or BOSS FV-500L/FV-500H) to the FOOT
SW/EXP PEDAL jack on the rear panel, allowing you to use
your foot to control a number of functions.
BOSS FS-5U or Roland DP-2) or expression pedal (such as
the Roland EV-5 or BOSS FV-500L/FV-500H) to the FOOT
SW/EXP PEDAL jack on the rear panel, allowing you to use
your foot to control a number of functions.
fig.06-040
The expression pedal functions according to the effect
settings, as shown below.
settings, as shown below.
• The expression pedal functions as a pitch shifter pedal
Use the following procedure to set the foot switch function.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SYS,” and press [ENTER].
fig.06-050
3
Press CURSOR [
] [
] and select “Foot SW.”
fig.06-060
4
Turn the TIME/VALUE dial and select the foot switch
function.
PLAY :
The song will alternate between play and
stop each time you press the foot switch.
stop each time you press the foot switch.
PUNCH :
Switches punch in and out alternately each
time you press the foot switch.
time you press the foot switch.
FX :
The insert effect will alternate between on
and off each time you press the foot switch.
and off each time you press the foot switch.
*
Not operational while Pitch Correction is in use.
5
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
processed.
When Using an Expression Pedal
Foot Switch
(FS-5U etc.)
Expression Pedal
(Roland EV-5 etc.)
Set the polarity switch
as shown in the following.
as shown in the following.
• Use only the specified expression pedal (Roland
EV-5,BOSS FV-500L/FV-500H; sold separately).
By connecting any other expression pedals, you risk
causing malfunction and/or damage to the unit.
By connecting any other expression pedals, you risk
causing malfunction and/or damage to the unit.
• With the EV-5 and FV-500L,FV-500H set the MIN
volume to 0.
• You can also use an FS-6 (sold separately) for the
foot switch. If using an FS-6, connect to only one of
the FS-6’s jacks, either the A or B jack.
Additionally, set the polarity switch to “FS-5U.”
The A&B jack cannot be used.
the FS-6’s jacks, either the A or B jack.
Additionally, set the polarity switch to “FS-5U.”
The A&B jack cannot be used.
When Using a Foot Switch
BR600_e2 191 ページ 2006年4月17日 月曜日 午前9時3分