Roland BR-600 用户手册
199
Initializing the BR-600’s Settings
Re
v0.10
v0.10
Section 6
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“INI,” and press [ENTER].
fig.06-290
3
Press CURSOR [
] [
] to move the cursor to
“CARD,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.06-300
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
When the initializing has been completed,
“Completed!” appears in the display.
When the initializing has been completed,
“Completed!” appears in the display.
“Keep power on! Song creating...” then appears in the
display, and a new song is automatically created.
In this case, the data type selected is HiFi (MT2).
When creation of the song is finished, the play screen
returns to the display.
display, and a new song is automatically created.
In this case, the data type selected is HiFi (MT2).
When creation of the song is finished, the play screen
returns to the display.
Initializing the Memory Card
• Be aware that when initialized, any existing data
on the card will be erased.
• If you initialize the memory card supplied with
the BR-600, the demo songs on the card will be
lost.
lost.
• Before you insert or remove a memory card,
always turn off the BR-600 first.
If a memory card is inserted when the power is
turned on, the data in the memory card may be
destroyed, or the memory card may become
unusable.
If a memory card is inserted when the power is
turned on, the data in the memory card may be
destroyed, or the memory card may become
unusable.
• Depending on the capacity of the memory card,
initializing may take more than ten minutes to
complete. This is not a malfunction. The progress
of the initializing is shown in the display. Do not
turn off the BR-600 until the initializing has been
completed.
complete. This is not a malfunction. The progress
of the initializing is shown in the display. Do not
turn off the BR-600 until the initializing has been
completed.
• Do not remove the memory card or turn off the
BR-600 while the display shows “Keep power on!”
Doing so can destroy the data on the memory card
and/or render the memory card itself unusable.
Doing so can destroy the data on the memory card
and/or render the memory card itself unusable.
BR600_e2 199 ページ ２００６年４月１７日 月曜日 午前９時３分