Roland BR-600 用户手册
200
Re
v0.10
v0.10
Conserving Battery Power (Power Save)
Your BR-600 is equipped with a power save function that
limits the current dissipation during use.
limits the current dissipation during use.
When the power save function is activated, if no button, or
TIME/VALUE dial on the BR-600 is used for a certain
amount of time, the BR-600 will enter the standby state and
turn off the display backlight and button indicators.
TIME/VALUE dial on the BR-600 is used for a certain
amount of time, the BR-600 will enter the standby state and
turn off the display backlight and button indicators.
Also, when in the standby state, the display will appear as
shown below.
shown below.
fig.06-310
Perform the procedure given below to activate the power
save function.
save function.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SYS,” and press [ENTER].
fig.06-320
3
Press CURSOR [
] [
] to select “PowerSave,” and
turn the TIME/VALUE dial to set the time until the
Power Save function is activated.
Valid Settings :
OFF, 1min, 3min, 5min, 10min
fig.06-330
4
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper
line of the display, while the lower line shows what is being
processed.
processed.
■
Deactivating the power save
function
function
Press any of the panel buttons to deactivate power save.
• The power save function is not activated during
recording and playback of songs, even when no
button or TIME/VALUE dial is used for the set
amount of time.
button or TIME/VALUE dial is used for the set
amount of time.
• The power save function is especially helpful
when the BR-600 is running on battery power.
• After the power save function is deactivated, the
Play screen appears.
BR600_e2 200 ページ ２００６年４月１７日 月曜日 午前９時３分