Raymarine Wind & Close Hauled Wind Instrument ST60 用户手册

28

ST60 Wind & Close Hauled Wind Instrument Owner’s Handbook

3. Hold down the 

 and 

 keys for approximately 2 seconds to enter 

User calibration then use the 

 key to select the wind angle screen (see the 

User calibration

 flow diagram).

4. Sail directly into the wind and adjust the analog pointer to zero, using the 

 and 

 keys. If you are unable to achieve the required degree of accu-

racy due to sea conditions, and errors become apparent during subsequent 
tack operations, repeat this procedure to achieve alignment accuracy.

5. Display the wind speed units screen.
6. Use the 

 and 

 keys to select the units you want, either knots (KTS) or 

meters per second (M/S).

Any speed unit changes will be applied to other SeaTalk instruments.

Hold down the 

 and 

 keys for 2 seconds to save your settings, exit 

User calibration and resume normal operation.

Hold down

and

for approximately 2 seconds

Press either

or

(decrease)

(increase)

to set the current wind angle

Press either

or

to set the required wind

speed units (KTS or M/S)

User calibration

D4316-1