Utica Boilers JE 安装指导

Fire, explosion, asphyxiation and electrical shock 

hazard.  Improper installation could result in death 

or serious injury.  Read this manual and understand 

all requirements before beginning installation.

  

Keep boiler area clear and free from combustible 

materials, gasoline and other flammable vapors 

and liquids.
DO NOT obstruct air openings to the boiler room.
Modification, substitution or elimination of factory 

equipped, supplied or specified components may 

result in personal injury or loss of life.
TO THE OWNER - Installation and service of this 

boiler must be performed by a qualified installer.
TO THE INSTALLER - Leave all instructions with 

boiler for future reference.
When this product is installed in the 

Commonwealth of Massachusetts the installation 

must be performed by a Licensed Plumber or 

Licensed Gas Fitter.

  

Never test for leaks with an open flame. Use soap suds 

to check all connections. This will avoid any possibility 

of fire or explosion.

Boiler is configured for operation with natural gas. 

Over-firing will result in premature failure of boiler 

sections and cause dangerous operation. Verify there is 

adequate gas supply piping. 

Never vent this boiler into enclosed space. Always 

connect boiler to chimney and vent to outside. Never 

vent to another room or inside abuilding.

Verify there is adequate air supply for complete  

combustion.

Follow regular service and maintenance schedule  for 

efficient and safe operation.

Fire hazard. Do not install boiler on non-combustible 

flooring such as carpeting or wood flooring. Failure 

to follow these instructions could result in death or 

serious injury.

   

DO NOT install boiler on  non-combustible flooring such 

as carpeting or wood flooring.

Installation must conform to the requirements of the 

authority having jurisdiction or, in the absence of 

such requirements, to the National Fuel Gas Code, 

ANSI Z223.1/NFPA54.
Where required by the authority having jurisdiction, the 

installation must conform to the standard for Controls 

and Safety Devices for Automatically Fired Boilers, 

ANSI/ASME CSD-1. Additional controls and safety 

devices are required for CSD-1.

Installation
Boiler is designed to provide wide heating capacity range 

with multiple burner modules, each equipped with its own 

set of controls. For purposes of orientation, gas manifold 

location is considered the front. Instructions are written 

for assembly of boiler starting with left side and working to 

right side.

When boiler arrives be sure to save and refer to 

instructions.
Inspect each item received for visible damage. If any 

parts are damaged, report this to freight company 

immediately and request them to call and make 

inspection before you make any installation. Have 

inspector prepare a signed report. Send copy of 

report to manufacturer.
We must have the signed inspection report of the 

freight company to prove their liability.
Read these instructions carefully before beginning 

the installation to be sure all packages have been 

received. It is recommended that you follow the 

step-by-step instructions for best assembly results. 

Before discarding any packing material carefully 

examine for loose parts. Also store all parts received 

where they will not be lost or damaged.