RuggedCom Welder RS400 用户手册
MAC Address Tables
RS400
211
ROS™ v3.5
Default: 1
Enter the port number upon which the device with this address is located. If the port should be
auto-learned, set this parameter to 'Learn'
Enter the port number upon which the device with this address is located. If the port should be
auto-learned, set this parameter to 'Learn'
CoS
Synopsis: { Normal, Medium, High, Crit }
Default: Normal
Set this parameter to prioritize the traffic for specified address.
Synopsis: { Normal, Medium, High, Crit }
Default: Normal
Set this parameter to prioritize the traffic for specified address.
9.4 Purging MAC Address Table
This command removes all dynamic entries from the MAC address table. The only negative
impact of this operation is that it causes flooding while addresses are relearned.
impact of this operation is that it causes flooding while addresses are relearned.