RuggedCom Welder RS400 用户手册
Serial Protocols
ROS™ v3.5
70
RS400
Default: 0 ms
The amount of delay (if any) to insert between the transmissions of individual messages out the
serial port.
The amount of delay (if any) to insert between the transmissions of individual messages out the
serial port.
DSCP
Synopsis: 0 to 63
Default: 0
DSCP - Differentiated Services Code Point, to set the DS byte in the IP header. DS byte setting
is supported in the egress direction only.
Synopsis: 0 to 63
Default: 0
DSCP - Differentiated Services Code Point, to set the DS byte in the IP header. DS byte setting
is supported in the egress direction only.
2.3.2 Raw Socket
Figure 41: Raw Socket Table