RuggedCom Welder RS400 用户手册
Serial Protocols
ROS™ v3.5
82
RS400
Figure 52: Mirrored Bits Form
Port
Synopsis: 1 to 4
Default: 1
The port number as seen on the front plate silkscreen of the switch.
Synopsis: 1 to 4
Default: 1
The port number as seen on the front plate silkscreen of the switch.
Transport
Synopsis: { TCP, UDP }
Default: UDP
The network transport used to transport protocol data over IP network.
Synopsis: { TCP, UDP }
Default: UDP
The network transport used to transport protocol data over IP network.
Loc Port
Synopsis: 1024 to 65535
Default: 61001
The local IP port to use when listening for an incoming connection or UDP data.
Synopsis: 1024 to 65535
Default: 61001
The local IP port to use when listening for an incoming connection or UDP data.
Rem Port
Synopsis: 1 to 65535
Default: 61000
The remote TCP port to use when placing an outgoing connection.
Synopsis: 1 to 65535
Default: 61000
The remote TCP port to use when placing an outgoing connection.
IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255 or { <EMTY STRING> }
Default:
Synopsis: ###.###.###.### where ### ranges from 0 to 255 or { <EMTY STRING> }
Default:
For outgoing TCP connection (client) and UDP transport this is the remote IP address to
communicate with.
For incoming TCP connection (server), this is the local interface IP address to listen to the local
port for connection request. If empti string is configured, IP address of management interface is
used.
communicate with.
For incoming TCP connection (server), this is the local interface IP address to listen to the local
port for connection request. If empti string is configured, IP address of management interface is
used.