RGB Spectrum Quadra 用户手册
O P E R A T I O N S
Enabling and Disabling Outputs
350-7951
Quadra User’s Guide
33
.
. .
.
.
3.
Query the command for the selected channel, to determine what the
current input source is. Type:
current input source is. Type:
INSRC <input #>
Enter
4.
To switch sources for a selected input, type:
INSRC <input #> [desired source]
Enter
S
Example: To switch input 1 to DVI, type:
INSRC 1 DVI
Enter
5.
Repeat from step 3 to switch additional inputs.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E N A B L I N G A N D D I S A B L I N G O U T P U T S
This section provides instructions for using the “
” command.
With this command, you can enable or disable one (or all) Quadra outputs. In
addition, using the optional duration parameter, you can fade an output to (or
from) black with fade durations up to 128 seconds.
addition, using the optional duration parameter, you can fade an output to (or
from) black with fade durations up to 128 seconds.
Use the following steps to enable or disable outputs:
1.
Request help text for the command. Type:
H OPEN
Enter
This action displays the command’s parameters and variables.
Figure 3-7.
Help Text — Output Enable
2.
To disable a selected output, type:
OPEN <output #> OFF
Enter
S
Example: To disable output 4, type:
OPEN 4 OFF
Enter
3.
To disable all outputs, type:
Note
When you fade or disable an output, all
WSR
and
WDR
parameters are retained.