Technicolor ASR08T 用户手册

8

- Connect the LNB coaxial cable to Socket 

d IF INPUT A.

- You can, if applicable, connect a second LNB to IF INPUT B connector 

e. Plug F must be

tightened by hand on the threading of the plug. Do not use any tools. Take care not to jam
the plug.

- You can now connect your equipment to the mains power supply. To do this, connect one of

the ends of the mains cable to connector 

j on the receiver and the other end to a mains

socket.

Our description of the receiver assumes that the set has been installed according to
instructions!

1. Connection to a Television Set :
- Using a SCART cable (supplied), connect the Socket 

f TV-SCART of your receiver to the

SCART socket of your Television Set. This connection provides optimum picture and sound
quality.

2. Connection to a VCR : 
- Using a SCART cable (not supplied), connect the Socket 

h VCR-SCART of your receiver

to the SCART socket of your VCR.

The equipment is operated using a cascade connection. 
The video recorder images will be transmitted to the TV through the TV SCART connector
f if the video recorder supplies the control voltage when it is in read mode (12V on pin
8 of the VCR SCART connector 

h).

3. Connection to a decoder
Using a SCART cable (not supplied), connect the Socket 

g DECODER-SCART of your

receiver  to the SCART socket of your decoder.

4. Connection to a stereo system :
Your satellite receiver can be connected to a stereo system using the CINCH connectors 

i.