Technicolor ASR08T 用户手册

9

On/Standby
Using set keypad:
Press the On/Standby key. 

Using remote control:
Switch the receiver on by pressing one of the numeric keys (0 to 9),

or

on the

remote control keypad. 
If the set is switched on using the

or

keys, the last programme number active

before switching off is called up, for example : " 13".

To switch the set off, press the Standby key.

The display shows : "  -"

Programme Selection
Using set keypad: 

Press the programme scrolling keys 

GH

Using remote control: 

a) Direct selection using numeric keys 0 to 9, or
b) Channel scrolling using the

or

. 

a) Direct selection:

For the first ten programmes, press the corresponding key briefly.

For two- or three-digit programme numbers, the number must be entered in three
seconds.

For example, to select Programme 14:
- Briefly press the 1 key " -1" appears on the display.

- Press the 4 key within three seconds to display " -14".

Programme 14 is displayed on the screen.

Examples:

Enter 1

Display : -1

Programme 1 

appears on screen

Enter 24

Display : -24

Programme 24 

appears on screen

Enter 399

Display : 399

Programme 399 

appears on screen

b) Channel scrolling using the

or

keys.

Press the

key to select the next programme.

Press the

key to select the further programme.

Volume Adjustment
You can adjust the receiver volume using the VOL + (louder) and VOL - (softer) keys. The
last setting in use is stored in memory when the receiver is placed on Standby.