TANDBERG CODIAN 2200 用户手册
82
Trap receiver
addresses 1 to
4
addresses 1 to
4
Enter the IP address or hostname for up to four
devices that will receive both the general and the
authentication failure traps.
devices that will receive both the general and the
authentication failure traps.
The traps that are sent by the IP VCR are all SNMP
v1 traps. You can configure trap receivers or you
can view the MIB using a MIB browser. You can
set the UDP port number for the trap in the format
<IP address>: <port number>. By default the
UDP port number is 162.
v1 traps. You can configure trap receivers or you
can view the MIB using a MIB browser. You can
set the UDP port number for the trap in the format
<IP address>: <port number>. By default the
UDP port number is 162.
Access control
Field
Field description
Usage tips
RO
community
community
Community string/password that gives read-only
access to all trap information.
access to all trap information.
RW
community
community
Community string/password that gives read/write
access to all trap information.
access to all trap information.
Note that SNMP community strings are not secure.
They are sent in plain text across the network.
They are sent in plain text across the network.
It is advisable to change the community strings
before enabling SNMP as the defaults are well
known.
before enabling SNMP as the defaults are well
known.
Trap
community
community
Community string/password that is sent with all
traps.
traps.
Some trap receivers can filter on trap community.