TANDBERG Telepresence T3 用户手册
PAGE 49/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBERG
Telepresence T3
mountinG thE
CollAborAtion sCrEEns
1.
Unpack the box marked with ’T3 Telepresence kit w/ TCU & screens’ where
the following items are found:
the following items are found:
3× Table Quick Buttons with
power supply and cable kit
power supply and cable kit
3× Touch Collaboration Display
(22”) with power supply
(22”) with power supply
6× Cable Well Assemblies
2.
Fasten the monitors to the monitor brackets using 8 c screws for each moni-
tor. Switch on the monitors.
tor. Switch on the monitors.
3.
Fasten screws (c) in the opening of the table as shown below.
24 × screw (c)
note!
The table must have all cables
mounted before the presentation
screens are installed.
screens are installed.