Omron SYSMAC C200HW-ZW3AT2-E-V2 用户手册

“L: Retrieve” is used to read routing tables from a file into the memory.

1) If routing tables are read from a file, the current routing tables residing in the

memory will be lost.

2) If routing tables in the memory have been modified, a confirmation window

will be displayed when you attempt to read routing tables from a file.

3) Routing table files for the Controller Link Support Software are compatible

with those for the SYSMAC Support Software and the SYSMAC LINK Sup-
port Utility. Therefore, routing files can be transferred between them.

1. Select “L: Retrieve” from the Routing Table Menu. If routing tables in the

memory have been modified, a confirmation window will be displayed.
Press “Y” to continue the read processing or press “N” to cancel the proces-
sing, and then press the Enter Key.

If routing tables in the memory have not been modified or “Y” is pressed to
continue, the following window will be displayed to prompt you to specify a
file name.

2. Specify the file name (including the directory name) to be read. Enter the file

name with Alphanumeric Keys, then press the Enter Key.

When this window appears, the data directory specified in “System setup”
will be displayed as the source directory. The Insert, Backspace, and Delete
Keys can be used to correct the characters displayed.

You can press the F8 (Files) Key to display the File Name List Screen and
then select a file name from the screen.

The file will be read.

“T: Transfer” is used to transfer routing tables between the personal computer
and the specified node as follows:

R: PC/Board 

→

Computer

Reads the routing tables set at the
specified node into the computer memory.

95

W: Computer 

→

PC/Board

Writes the routing tables from the memory
to the specified node for registration.

96

V: Compare

Compares the routing tables set at the
specified node with the routing tables in
the memory.

96

The following procedure is sued to display the Transfer Routing Table Menu.

1. Select “T: Transfer” from the Routing Table Menu. The following window will

be displayed to prompt you to specify the target node.

2. Specify the desired node. Use the Cursor Keys to move the cursor to the

desired field, then enter a numeric value with Numeric Keys. (Use Alphanu-
meric Keys to enter a PC ID.)