Omron SYSMAC C200HW-ZW3AT2-E-V2 用户手册

Press the Enter Key to register the entered value and move the cursor to the
next field.

PC ID

Enter the PC ID of the node.

Use this field only when a PC ID is to be used. If a PC ID is
used, the network address and node address will be
automatically input (see page 124).

Network address

Enter the network address of the node.

The setting range is between 0 and 127.

Network address 0 represents the local network (the address
of the network containing the node to which the Controller
Link Support Software is connected). (see note)

For CS1-series and CV-series PCs with multiple
Communications Units, specify the network address explicitly.

Node address

Enter the node address of the node.

The setting range is between 0 and 62.

Node address 0 represents the local node (the address of the
node to which the Controller Link Support Software is
connected).

Note For CV-series CPU Units manufactured before April 1996 (lot No.:

jj

46), always set routing tables. Specify in “Network address” the

value (other than 0) specified in the routing tables. Refer to the Con-
troller Link Units Operation Manual (W309) for details.

Press the F10 (End) Key to close the Node Status window.