KVH Industries TracVisionM7 用户手册

16

Follow these steps to set up the system for the 
desired pair of satellites.

Enter the following commands via Windows 
HyperTerminal or KVH Flash Update Wizard:

a. Type HALT then press Enter.

b. Type DEBUGON then press Enter.

c. Type the following command then press 

Enter. Italics indicate a variable.

SatelliteA = Name of 1st desired satellite
SatelliteB = Name of 2nd desired satellite

See Appendix B on page 23 for a list of all 

available satellites. Be sure to enter the 

satellite names as they appear in the library.

d. Type @L,A then press Enter.

e. Type ZAP then press Enter. The antenna 

restarts. Wait two minutes for system startup.

f. (Linear only) Set up the receiver(s) for the 

same satellites, and in the same order, that 

you set them up in the antenna:

Sat. A

Alternative 1 or A

DiSEqC 1

Sat. B

Alternative 2 or B

DiSEqC 2

Figure 26:  Technician Programming the Antenna

The antenna is programmed at the factory for 

the following default satellite pair:

Circular: DSS_101 & DSS_119 (DIRECTV)

Linear: ASTRA & HOTBIRD

If these are the customer’s desired satellites, 

you may skip this step.

Programming Astra2S and Thor satellites:

Select Satellites

13