KVH Industries TracVisionM7 用户手册

15

c. Ensure the antenna has a clear, unobstructed 

view of the sky.

d. Apply power to the satellite TV receiver(s) 

and the switchplate (see Figure 23 on page 

14). Wait two minutes for system startup.

e. Data should now be scrolling in your 

HyperTerminal window (see Figure 25). If no 

data appears, check your connections and 

make sure you’re using the right COM port.

Enter Your Latitude and Longitude

To enter your position information into the 
antenna, enter the following commands via 
Windows HyperTerminal or KVH Flash Update 
Wizard:

a. Type HALT then press Enter.

b. Type DEBUGON then press Enter.

c. Type the following command then press 

Enter. Italics indicate a variable.

XX = Latitude (0 - 90)
A = S (South) or N (North)
YYY = Longitude (0-180)
B = E (East) or W (West)

Figure 25:  Antenna Data Scrolling in Window

Entering a vessel position of 57°N, 22°E:

Continued...

12