KVH Industries TracVisionM7 用户手册

TracVision M7 Installation Guide

Switchplate Configuration

KVH, TracVision, and the unique light-colored dome with contrasting baseplate are registered trademarks of KVH Industries, Inc.

All other trademarks are property of their respective companies. The information in this document is subject to change without notice.

54-0417 Rev. A

These instructions explain how to install the TracVision M7 satellite TV antenna system on a
vessel. Complete instructions on how to use the system are provided in the User’s Guide.

Installation Steps

Who Should Install the System?

To ensure a safe and effective installation, KVH recommends that a KVH-authorized marine
technician install the TracVision antenna. KVH-authorized technicians have the tools and
electronics expertise necessary to install the system. To find a technician near you, visit

www.kvh.com/wheretogetservice

Linear vs. Circular Systems

The installation process differs slightly depending on the type of LNB (low noise block) that is
installed in the antenna (linear or circular). These differences are noted throughout this manual.
Appendix B on page 23 notes the type of LNB required for each region and satellite.

Technical Support

If you need technical assistance, please contact KVH Technical Support:

1. Inspect Parts and Get Tools, 3

2. Plan the Antenna Installation, 4

3. Plan the Switchplate Installation, 5

4. Prepare the Antenna Site, 6

5. Remove the Restraint, 7

6. Wire the Antenna, 8

7. Mount the Antenna, 9

8. Wire the Switchplate, 10

9. Wire the Receiver(s), 11

10. Connect Power, 12