KVH Industries TracVision M5 用户手册

The satellite library in the TracVision antenna
includes two slots for user-defined satellites
(USER 1 and USER 2). You can program one or
both of these library slots for any satellite you
wish that is not already set up in the library.

Connect a Laptop to the Antenna

To program your user-defined satellite(s), you
first need to connect a Windows® laptop
computer to the TracVision system and start
Windows HyperTerminal.

TIP: If you are a KVH-authorized technician, you can
use the KVH Flash Update Wizard instead of
HyperTerminal. Enter commands in the wizard’s
“Antenna Comms” window. You do not need to flash
the antenna to enter commands.

1. Turn off the TracVision antenna.

2. Using the flash adapter cable supplied in the

kitpack, connect your laptop to the main flash

port (top right stereo jack) on the MCP (see

Figure 49).

NOTE: If your computer does not have a DB9 serial
COM port, you can use the USB-to-RS232 adapter
manufactured by IOGear (IOGear part number
GUC232A) or Belkin (Belkin part number F5U109).

3. Open Windows HyperTerminal and establish

the following settings for your COM port (see

Figure 50):

• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None

TIP: To view characters on the screen as you type, set
up HyperTerminal to echo typed characters. Select
“Properties” from the File menu; select “ASCII
Setup” at the Settings tab; then select “Echo typed
characters locally” at the ASCII Setup window.

Figure 48: Technician Programming the Antenna

Figure 49: Main Flash Port on MCP

Main Flash Port

Figure 50: HyperTerminal Settings

Maintenance Port

User-Defined Satellites

Appendix