Jagermeister Beverage Dispenser JEM 用户手册
- 15 -
Chapter 5
JEM Setup and Operation
General:
The Model JEM Jägermeister Tap Machine® is a unique display,
refrigeration and delivery system designed to chill and dispense Jägermeister Herbal
Liqueur at temperatures well below freezing - 0º F (-18º C).
Liqueur at temperatures well below freezing - 0º F (-18º C).
WARNING
DO NOT introduce water or other fluids with a freezing temperature above -15ºF
while the On/Off switch is in the ON position.
Failure to do so may result in the unit freezing causing internal damage.
How Much Jägermeister Does The Machine Hold?
The Jägermeister Tap Machine® holds the following amounts of Jägermeister:
Bottle Well Assembly (not chilled)
-
100ml – @3.38 Fl. Oz.
Cooling System (Chilled Colder Than Ice) - 1470ml - @ 49.68 FL. Oz
Total
Total
-
1570 ml - @ 53.06 FL Oz.
THE MACHINE WILL LOAD A TOTAL OF APPROXIMATELY 1 ½ Liters OR ABOUT
53 OUNCES OF JÄGERMEISTER.
The Model JEM Jägermeister Tap Machine® is designed to hold only 750 ml or 1.0 L
Jägermeister bottles. DO NOT ATTEMPT TO USE BOTTLES LARGER THAN 1.0
Liters.
Electrical Requirements:
The Model JEM requires a 115 VAC, 60 Hz. 15 Amp, 3-pronged power receptacle
within 5 feet of the rear of the unit.
within 5 feet of the rear of the unit.
DO NOT USE AN EXTENSION CORD OR
SURGE SUPRESSOR TO POWER THIS UNIT.
FAILURE TO PROVIDE
ADEQUATE ELECTRICAL POWER WILL RESULT IN IMPROPER
CHILLING OF THE JÄGERMEISTER OR POSSIBLE DAMAGE TO
INTERNAL COMPONENTS
CHILLING OF THE JÄGERMEISTER OR POSSIBLE DAMAGE TO
INTERNAL COMPONENTS
Remove the Machine from the Shipping Container:
Follow the instructions for removing the machine from the shipping box. DO NOT
HOLD OR CARRY THE MACHINE BY THE FAUCTET MOUNTED ON THE FRONT
OF THE MACHINE. DOING SO MAY DAMAGE THE MACHINE.
HOLD OR CARRY THE MACHINE BY THE FAUCTET MOUNTED ON THE FRONT
OF THE MACHINE. DOING SO MAY DAMAGE THE MACHINE.
Remove From Plastic Bag:
Remove the plastic handles from the machine by cutting with a scissors. Remove the
machine from the protective plastic bag. Remove the protective plastic coverings that
are protecting the display panels on the unit.
machine from the protective plastic bag. Remove the protective plastic coverings that
are protecting the display panels on the unit.