Motorola GT10 用户手册

GT10/GT30

9.1

What to Do If Something Unusual Occurs (GT10)

138

1) The screen transfer cable is not con-

nected.

2) The PC and GT10 COM. port are con-

nected.

1) Confirm that the screen transfer cable

is correctly and firmly connected.

2) Connect to TOOL port with screen

transfer cable.

GTWIN HELP

An error has occurred in the GT10 sys-

tem.

1) After confirming the safety of the de-

vice, etc., turn off the power supply

and then turn it on again. The GT10

CPU will be reset.

2) If 1) produces no change, bring up the

system menu and initialize the

memory (F–ROM), then transfer data

again from GTWIN to the GT10.

CAUTION:

When doing this, all base screen data,

GT10 setting data, keyboard screen

data, and bitmap data will be lost. Be-

fore doing this, make sure all data has

been backed upage 

3) If 2) produces no change, set the op-

erating mode setting switches 2, 3 and

4 on the rear of the GT10 to ON and

reset the power supply.

CAUTION:

When doing this, all of the contents will

revert to those in effect at the time of

shipping, and all of the GT10 memory

contents will be cleared. Before doing

this, make sure all data has been

backed upage