Maretron FPM100 用户手册
FPM100 User’s Manual
Figure 1 - Graph of Transducer Accuracy vs. Tank Depth
The pressure transducer you select must have sufficient range to measure the full height of the
liquid column of a full tank. The table in Figure 2 below shows the maximum depth that can be
sensed by each pressure transducer type. This table assumes that water level is being
measured. The maximum depth of diesel fuel can that can be measured varies from these
figures slightly depending on the density of the diesel fuel.
liquid column of a full tank. The table in Figure 2 below shows the maximum depth that can be
sensed by each pressure transducer type. This table assumes that water level is being
measured. The maximum depth of diesel fuel can that can be measured varies from these
figures slightly depending on the density of the diesel fuel.
Transducer
Maximum tank depth
PT-0-3PSI-01 (0-3 PSI)
83.04” (2.11m)
PT-0-5PSI-01 (0-5 PSI)
138.4” (3.52m)
Figure 2 - Pressure Transducer Selection Chart for Tank Level Applications
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron FPM100, you should find the following items:
• 1 – FPM100 Fluid Pressure Monitor
• 1 – Parts Bag containing 4 Stainless Steel Mounting Screws
• 1 – FPM100 User’s Manual
• 1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
Page 4
Revision 1.3