Lucent Technologies Medical Alarms Release 3 Version 8 用户手册

Network regions are 
interconnected

Enter 

n

. This application is not used for 

C-LAN.

Enabled

Enter

 y 

to enable the C-LAN IP interface. 

After initial administration, you must disable 
the interface before you make any changes.

Type

Enter

 C-LAN

.

Slot

Enter the equipment location of the C-LAN 
circuit pack. 

Code/Sfx

This is a display-only field that shows the 
designation number of the circuit pack 
installed in the specified slot.

Node Name

Enter the switch node name assigned on 
Pages 2 through 6 of the Node Names form. 
In this example, enter

 switchhost

. The 

same node name cannot be assigned to two 
different IP interfaces.

Subnet Mask

Identifies which portion of an IP address is a 
network address and which is a host 
identifier. Use the default entry, or check with 
the LAN administrator on site if connecting 
through the customer’s LAN.

Gateway Address

If the application goes to points off the 
subnet, a Gateway Address of the router is 
required; if the switch and the CMS server 
are on the same subnet, a Gateway address 
if not required. 
If required, enter the address of a network 
node that will serve as the default gateway 
for the IP interface.  If using ethernet only, 
and a Gateway Address is administered, no 
IP routes are required.

Net Rgn

For a C-LAN IP interface, use

 1

.