Intermec 751G 用户手册
Chapter 3 — Configuring the Computer
44
751G Color Mobile Computer User’s Manual
To use Microsoft ActiveSync
1
Use an ActiveSync cable to connect the 751G to your PC.
2
Wait for a “Connected” message to appear in the Microsoft ActiveSync
application to signal a connection to the 751G. If necessary, select File >
Get Connected to initiate a connection.
application to signal a connection to the 751G. If necessary, select File >
Get Connected to initiate a connection.
5
In the “Mobile Device” folder, go to the folder where you want the files
located on the 751G, do a right-click for a pop-up menu, select Paste.
located on the 751G, do a right-click for a pop-up menu, select Paste.
6
When the files are pasted, perform a warm-boot on the 751G, then wait
for the LED on the top left of your keypad to stop blinking. Tap Start >
Programs > Windows Explorer to locate the newly copied executable
files, then tap these files to activate their utilities.
for the LED on the top left of your keypad to stop blinking. Tap Start >
Programs > Windows Explorer to locate the newly copied executable
files, then tap these files to activate their utilities.
Using a Storage Card
Use the following steps to install an application using a storage card:
1
Suspend the 751G and remove its Secure Digital storage card.
2
Using a Secure Digital adapter, place the Secure Digital storage card in
your PC card drive, then create a subdirectory on the Secure Digital
drive in which to store your application.
your PC card drive, then create a subdirectory on the Secure Digital
drive in which to store your application.
3
Copy your application, data files, and all required DLLs and drivers to
the subdirectory created on the Secure Digital storage card.
the subdirectory created on the Secure Digital storage card.
4
Add your application to the AutoUser.dat file on the “\SDMMC
Disk\2577” directory with the following statement:
Disk\2577” directory with the following statement:
RUN=\<your directory>\<yourapp.exe>
where your directory is the directory on the Secure Digital storage card
where the application was installed, and yourapp.exe is the name of your
application. Finish the “RUN=” statement with a CR/LF combination.
There may be multiple run statements in the file.
where the application was installed, and yourapp.exe is the name of your
application. Finish the “RUN=” statement with a CR/LF combination.
There may be multiple run statements in the file.
3
Click Explore to access the “Mobile Device” folder on your unit.
4
From your PC, select Start > Windows Explorer, then browse the
“C:\Intermec\751G Mgmt Tools\CabFiles” path for any CAB files
needed for your 751G. Right-click the file, then select Copy.
“C:\Intermec\751G Mgmt Tools\CabFiles” path for any CAB files
needed for your 751G. Right-click the file, then select Copy.