Intermec 751G 用户手册

Add the AuotRun.exe file to the “\SDMMC Disk\2577” folder.

Remove the Secure Digital storage card from your PC and reinstall it 
into the 751G, then warm-boot the 751G to add these files to the Secure 
Digital storage card.

If the AutoUser.dat file is found and the “RUN=” statement is correct, the 
task manager launches and executes your program on startup.

Download the file from the Intermec web site, unzip it on your desktop.

From the SmartSystems Console, drag-and-drop the application onto 
each 751G discovered in your network.

To download SmartSystems Foundation, go to

open the Device Management page. For information on using the 
SmartSystems Console, see its online help.

You can use the Wavelink Avalanche device management system to install 
applications on all of your wireless 751Gs.

The wireless 751G ships with the Avalanche Enabler already loaded on it. 
The Avalanche Enabler is configured to activate automatically (typically on 
a clean-boot).

When the Avalanche Enabler is activated, the 751G attempts to connect to 
the Avalanche Agent. When the 751G connects to the Agent, the Agent 
determines whether an update is available and immediately starts the 
software upgrade, file transfer, or configuration update.

Use the Avalanche Management Console to install software packages 
and updates. For help, see its online help, contact an Intermec 
representative, or visit the Wavelink web site at

.

Schedule the 751G updates or manually initiate an update using the 
Avalanche Management Console. 

You can use the SmartSystems Console to drag-and-drop Intermec 
applications onto your 751Gs. The 751G ships with the SmartSystems 
client loaded on it. The console is part of SmartSystems Foundation and is 
available from the Intermec web site. 

Note: If you manually activate the Avalanche Enabler on the 751G, you 
may be prompted for a password when you exit the Avalanche Enabler. The 
default password is leave.