Hitachi 3300MFP 用户手册
116 8 Networking
EN
Tag
RFC 2132
Option
Option
Description
nodename
_
Name of the peripheral device. Identifies an entry point to a list of
parameters for the specific peripheral device. Must be the first field in an
entry. (In the example above, the
parameters for the specific peripheral device. Must be the first field in an
entry. (In the example above, the
nodename
is
picasso
.)
hn
12
Host name tag. This tag does not take a value but causes the BOOTP
daemon to download the host name to the print server. The host name will
be printed on the Jetdirect configuration page, or returned on an SNMP
sysName request by a network application.
daemon to download the host name to the print server. The host name will
be printed on the Jetdirect configuration page, or returned on an SNMP
sysName request by a network application.
ht
_
Hardware type tag. For this HP Jetdirect print server, set this to ether (for
Ethernet). Must precede the
Ethernet). Must precede the
ha
tag.
vm
_
The BOOTP report format tag (required). Set this tag to
rfc1048
.
ha
_
Hardware address tag. The hardware (MAC) address is the link-level or
station address of the HP Jetdirect print server. It can be found on the
Jetdirect configuration page as the Hardware Address, and also printed on a
label attached to the print server. The
station address of the HP Jetdirect print server. It can be found on the
Jetdirect configuration page as the Hardware Address, and also printed on a
label attached to the print server. The
ht
tag must precede this tag.
ip
_
IP address tag (required). This will be the print server's IP address.
sm
1
Subnet mask tag. The subnet mask will be used by the print server to
identify the portions of an IP address that specify the network/subnetwork
number and the host address.
identify the portions of an IP address that specify the network/subnetwork
number and the host address.
gw
3
Gateway IP address tag. This address identifies the IP address of the default
gateway (router) that the HP Jetdirect print server will use for
communications with other subnets.
gateway (router) that the HP Jetdirect print server will use for
communications with other subnets.
ds
6
DNS (Domain Name System) server’s IP address tag. Only a single name
server can be specified.
server can be specified.
dn
15
Domain name tag. Specifies the domain name for the print server (for
example, support.hp.com). It does not include the host name—it is not the
Fully Qualified Domain Name (such as printer1.support.hp.com).
example, support.hp.com). It does not include the host name—it is not the
Fully Qualified Domain Name (such as printer1.support.hp.com).
ef
18
Extensions file tag that specifies the relative path name of the TFTP
configuration file. This tag is similar to the vendor-specific tag T144.
configuration file. This tag is similar to the vendor-specific tag T144.
na
44
Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS). A
primary and secondary server may be specified in order of preference.
primary and secondary server may be specified in order of preference.
lease-time
51
DHCP IP address lease duration time (seconds).
tr
58
DHCP T1 timeout, specifying the DHCP lease renewal time (seconds).
tv
59
DHCP T2 timeout, specifying the DHCP lease rebind time (seconds).