Hitachi 3300MFP 用户手册
EN
Using BOOTP 117
Use the following conventions for the bootptab file entries:
●
A colon (:) indicates the end of a field.
●
A backslash (\) indicates that the entry is continued on the next line.
●
Spaces are not allowed between the characters on a line.
●
Names, such as host names, must begin with a letter and can contain only letters, numbers,
periods (for domain names only), or hyphens.
periods (for domain names only), or hyphens.
●
The underscore character (_) is not allowed.
lg
7
syslog server’s IP address tag. It specifies the server to which the print
server sends syslog messages.
server sends syslog messages.
T144
_
An HP-proprietary tag that specifies the relative path name of the TFTP
configuration file. Long path names may be truncated. The path name must
be in double quotes (“pathname”). For file format information, refer to the
TFTP file entries below. Note that standard BOOTP RFC-2132 option 18
(extensions file path) also allows the standard tag ef to specify the relative
path name of the TFTP configuration file.
configuration file. Long path names may be truncated. The path name must
be in double quotes (“pathname”). For file format information, refer to the
TFTP file entries below. Note that standard BOOTP RFC-2132 option 18
(extensions file path) also allows the standard tag ef to specify the relative
path name of the TFTP configuration file.
T145
_
Idle Timeout option. An HP-proprietary tag to set the idle timeout (seconds),
which is the amount of time that a print data connection may remain idle
before being closed. The range is 1–3600 seconds.
which is the amount of time that a print data connection may remain idle
before being closed. The range is 1–3600 seconds.
T146
_
Buffer Packing option. An HP-proprietary tag to set buffer packing for TCP/IP
packets:
0: (default) Normal, data buffers are packed before sending to the printer.
1: Disable buffer packing, data is sent to the printer when received.
packets:
0: (default) Normal, data buffers are packed before sending to the printer.
1: Disable buffer packing, data is sent to the printer when received.
T147
_
Write Mode option. An HP-proprietary tag that controls the TCP PSH flag
setting for device-to-client data transfers:
0: (default) Disables this option, flag not set.
1: All-push option. Push bit is set in all data packets.
2: EOI-push option. Push bit is set only for data packets that have an
End-of-Information flag set.
setting for device-to-client data transfers:
0: (default) Disables this option, flag not set.
1: All-push option. Push bit is set in all data packets.
2: EOI-push option. Push bit is set only for data packets that have an
End-of-Information flag set.
T148
_
IP Gateway Disable option. An HP-proprietary tag to prevent configuration of
a gateway IP address:
0: (default) Allows a gateway IP address.
1: Prevents a Gateway IP address from being configured.
a gateway IP address:
0: (default) Allows a gateway IP address.
1: Prevents a Gateway IP address from being configured.
T149
_
Interlock Mode option. An HP-proprietary tag that specifies whether an
acknowledgement (ACK) on all TCP packets is required before the printer is
allowed to close a Port 9100 print connection.
acknowledgement (ACK) on all TCP packets is required before the printer is
allowed to close a Port 9100 print connection.
T150
_
TFTP server’s IP address option. An HP-proprietary tag to specify the IP
address of the server where the TFTP configuration file is located.
address of the server where the TFTP configuration file is located.
T151
_
Network configuration option. An HP-proprietary tag to ensure other
dynamic configuration methods are not used:
BOOTP-ONLY: Send BOOTP requests only, not DHCP.
DHCP-ONLY: Send DHCP requests only, not BOOTP.
dynamic configuration methods are not used:
BOOTP-ONLY: Send BOOTP requests only, not DHCP.
DHCP-ONLY: Send DHCP requests only, not BOOTP.
Tag
RFC 2132
Option
Option
Description