Hitachi GR2000-B Series 用户手册
Hitachi Gigabit Router GR2000-B Series Quick Start Guide
2-10
GR2K-GA-0008
Rev. 1.00
2. Push the lever toward the direction indicated by the arrow as shown in Figure
2-13 below.
Figure 2-13 Removing a Memory Card
3. Pull out the memory card as shown in Figure 2-14 below.
Figure 2-14 Memory Card Removed.
2.8
Software
Software is preinstalled on the memory card when the GR2000-B is shipped. Refer to
the GR2000 Applications Guide for procedures for re-installing software onto a
memory card.
the GR2000 Applications Guide for procedures for re-installing software onto a
memory card.
!
Caution: While the access indicator (ACCESS) for a memory card is lit, the memory
card is being accessed. DO NOT pull out a memory card or turn off the
power switch while the memory card is being accessed. If so, you could
permanently damage the memory card.
power switch while the memory card is being accessed. If so, you could
permanently damage the memory card.
Some commands require a long time to finish accessing a memory card
when they are executed. Make sure that the access to a memory card is
finished before pulling it out or turning off the power switch.
when they are executed. Make sure that the access to a memory card is
finished before pulling it out or turning off the power switch.
Lever
Memory Card
M em ory Card