Gaggenau IN-COUNTER STEAMER VK 230 714 用户手册
13
Overheating protection
In the event of overheating, the appliance
automatically turns off the heating element in order to
protect the countertop and cabinets. The
automatically turns off the heating element in order to
protect the countertop and cabinets. The
©
appears
on the display. Turn off the appliance and let it
completely cool down.
completely cool down.
Potential causes of overheating:
▯
Appliance was turned on empty (without liquid in
the cooking basin).
the cooking basin).
▯
The cooking basin was filled with very hot water.
▯
Appliance was cooking on empty or fluid dropped
below minimum mark.
below minimum mark.
▯
Appliance was run for too long at steam cooking
level without lid.
level without lid.
▯
Cooking basin is heavily calcified.
Safety shut-off
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after 4
hours if the appliance is not operated during this time.
If a temperature below 160°F (70°C) is set, heating is
switched off after 8 hours. Flashing dashes appear on
the display.
feature. Every heating operation is switched off after 4
hours if the appliance is not operated during this time.
If a temperature below 160°F (70°C) is set, heating is
switched off after 8 hours. Flashing dashes appear on
the display.
Turn the temperature control knob to 0. You can then
operate the appliance in the way to which you are
accustomed.
operate the appliance in the way to which you are
accustomed.
Draining cooking liquid
9
WARNING
Risk of scalding
When draining water without a fixed drain
connection: First let appliance cool down. To
collect the water, place an appropriate
container with sufficient capacity under the
appliance.
When draining water without a fixed drain
connection: First let appliance cool down. To
collect the water, place an appropriate
container with sufficient capacity under the
appliance.
Note: If you do not have a fixed drain connection, you
must install the AG 060 000 drain installation set and
put a temperature-resistant vessel of appropriate size
(at least 10 l or about 20 pints) under the drain valve.
must install the AG 060 000 drain installation set and
put a temperature-resistant vessel of appropriate size
(at least 10 l or about 20 pints) under the drain valve.
Opening the drain valve
1
Turn the temperature control knob to the left to
the
the
¤
position.
2
Turn the short-term timer control knob to the left
to the
to the
¤
position and hold it in this position.
A signal sounds.
¤
flashes in the display after a few
seconds. The drain valve is opened.
¤
lights up
permanently in the display when the drain valve is
open.
open.
Closing the drain valve
1
Turn the temperature control knob to the right to
the 0 position.
the 0 position.
2
A signal sounds.
¤
flashes in the display after a
few seconds. The drain valve is closed.
¤
goes
off as soon as the drain valve is closed.
Notes
‒
¤
flashes in the display if the drain valve is not
completely open or closed.
‒
Always leave the residue strainer on the drain
opening. This ensures that food leftovers will not
block the drain valve.
opening. This ensures that food leftovers will not
block the drain valve.