Avaya Media Gateway G700 用户手册

Before assigning an IP network region to a G700, you must define network region on the IP 
Network Region form. After a network region is defined, you can assign it to the various network 
elements (servers, gateways, IP phones).

The information you need to do this should be provided in your planning documentation. Use 
the system defaults if the planning documentation does not specify otherwise.

For a G700 with an S8300 as primary controller, there will usually be one network region, 
defined as 1. The procedure below uses 1 for the network region number as an example but the 
procedure applies for any network region number from 1 to 250.

CAUTION:

Defining IP network regions can be quite complex. For detailed information on 
the use and administration of IP network regions, see ‘‘Administration for Network 
Connectivity for Avaya Communication Manager, 555-233-504.’’

1. At the SAT prompt, type change ip-network-region 1.

The S8300 displays the IP Network Region screen.

change ip-network-region 1 

Page   1 of   19 

                               IP NETWORK REGION

Region: 1  

Location:

Authoritative Domain:

    Name: 

MEDIA PARAMETERS

Intra-region IP-IP Direct Audio: yes

Codec Set: 1

   

 Inter-region IP-IP Direct Audio: yes

UDP Port Min: 2048

 

             IP Audio Hairpinning? y

UDP Port Max: 3048

DiffServ/TOS PARAMETERS

RTCP Reporting Enabled? n

 Call Control PHB Value: 34

RTCP MONITOR SERVER PARAMETERS

Audio PHB Value: 46

Use Default Server Parameters? y

Video PHB Value: 26

802.1P/Q PARAMETERS

 Call Control 802.1p Priority: 7

Audio 802.1p Priority: 6

 

Video 802.1p Priority: 5

AUDIO RESOURCE RESERVATION PARAMETERS

H.323 IP ENDPOINTS

RSVP Enabled? n

H.323 Link Bounce Recovery? y

 Idle Traffic Interval (sec): 20

   Keep-Alive Interval (sec): 5

  

Keep-Alive Count: 5