Allen & Heath r16 用户手册
Allen & Heath 21 ZED-R16 User Guide
AUX MASTERS & MAIN OUTPUTS.
+6
AUX MASTER
O
O
1
+6
AUX MASTER
O
O
2
+6
AUX MASTER
O
O
3
+6
AUX MASTER
O
O
4
AFL
AFL
AFL
AFL
AUX 1
AUX 2
AUX 3
AUX 4
2 TRACK 1 OUT
L
R
INSERT L
INSERT R
2 TRACK 2 OUT
L
R
2 Track 1 Output XLR connectors
Standard 3-Pin XLR panel plug wired as Pin 1=Chassis,
Pin 2=hot (+), Pin 3=Cold (-).
Electronically balanced, +4dBu = 0VU.
These are the main stereo outputs, normally fed from
the main L-R mix, they can be fed from the 2 Track 1
phono inputs if the Replace Mix switch is pressed (for
background music or monitoring), also from 2 Track 2
jack inputs for dubbing or monitoring.
Pin 2=hot (+), Pin 3=Cold (-).
Electronically balanced, +4dBu = 0VU.
These are the main stereo outputs, normally fed from
the main L-R mix, they can be fed from the 2 Track 1
phono inputs if the Replace Mix switch is pressed (for
background music or monitoring), also from 2 Track 2
jack inputs for dubbing or monitoring.
Auxiliary Output Master Level controls
The Aux master level controls adjust the overall level of each of the Aux mixes 1
to 4. The range of control is from off (fully attenuated) to +6dB.
There is an AFL (after fade listen) switch on each Aux mix to check the signal after
the master level control.
to 4. The range of control is from off (fully attenuated) to +6dB.
There is an AFL (after fade listen) switch on each Aux mix to check the signal after
the master level control.
Auxiliary Output jack sockets.
Standard 1/4” (6.25mm) Jack sockets for the Aux outputs 1—4.
Impedance balanced. Wired Tip=Hot(+), Ring=cold (-), Sleeve=Chassis.
Impedance balanced. Wired Tip=Hot(+), Ring=cold (-), Sleeve=Chassis.
Auxiliary AFL
The After Fade Listen switch sends the post master level control Aux signal to the
PFL/AFL monitoring system allowing it to be checked in the engineers headphones
and control room monitor speakers.
PFL/AFL monitoring system allowing it to be checked in the engineers headphones
and control room monitor speakers.
2 Track 2 Output jack sockets
Standard 1/4” (6.25mm) Jack sockets.
Ground compensated (noise balanced).
Wired Tip=Hot(+), Ring=cold (-), Sleeve=Chassis.
The 2 Track 2 outputs are normally fed from the main
L-R mix, but can be sourced from the 2 Track 1 phono
inputs for dubbing purposes.
Ground compensated (noise balanced).
Wired Tip=Hot(+), Ring=cold (-), Sleeve=Chassis.
The 2 Track 2 outputs are normally fed from the main
L-R mix, but can be sourced from the 2 Track 1 phono
inputs for dubbing purposes.
Insert L & R jack sockets
Standard 1/4” (6.25mm) Jack sockets.
The main L-R mix insert connectors for inserting signal
processing equipment such as compressors or equalis-
ers. They are placed just before the main L-R faders in
the signal path.
Wired Tip=send, Ring=return, Sleeve=Chassis. Nomi-
nal level is 0dBu.
The main L-R mix insert connectors for inserting signal
processing equipment such as compressors or equalis-
ers. They are placed just before the main L-R faders in
the signal path.
Wired Tip=send, Ring=return, Sleeve=Chassis. Nomi-
nal level is 0dBu.
1
1
4
3
2
2
3
4
5
5
6
6