Allen & Heath AP5195 用户手册
10
PA User Guide
Installing the Console
The PA Series is portable and designed for stand alone operation. The smaller PA12 model can also
be 19” rack mounted by replacing the trims with the rack ears provided. Either way, ensure adequate
ventilation around the unit and heed all warnings regarding mains power safety and earthing.
be 19” rack mounted by replacing the trims with the rack ears provided. Either way, ensure adequate
ventilation around the unit and heed all warnings regarding mains power safety and earthing.
1 Carry Handle Metal handle for lifting and carrying the
console. The weight is centrally distributed. Lift the console by
holding the handle securely in the middle. To prevent damage
to the controls, carry it with the control surface away from you.
holding the handle securely in the middle. To prevent damage
to the controls, carry it with the control surface away from you.
To avoid injury to yourself or damage to the
equipment always ensure you are correctly positioned and
grip securely when lifting, moving or transporting the
equipment.
grip securely when lifting, moving or transporting the
equipment.
2 Feet Protective rubber feet are fitted to both the base and
the rear of the console so that it can be positioned for stand
alone operation or on the floor while it is being carried. This
avoids damage to the mounting surface and console parts.
alone operation or on the floor while it is being carried. This
avoids damage to the mounting surface and console parts.
3 Front and Side Trims The front armrest, carry handle and
side trims offer both protection and style to the console. They
can be easily removed for fitting the metal ears provided when
you want to permanently mount the console in a 19” rack or
plinth. This option only applies to the smaller PA12 model.
Instructions for fitting the rack ears is provided later in this user
guide. The console can be rack mounted in either of two
positions as described below.
can be easily removed for fitting the metal ears provided when
you want to permanently mount the console in a 19” rack or
plinth. This option only applies to the smaller PA12 model.
Instructions for fitting the rack ears is provided later in this user
guide. The console can be rack mounted in either of two
positions as described below.
4 Rack Position 1 Shows the ears fitted for top of rack
mounting. The controls are angled upwards above the rack for
easier access during operation. This position may also be
preferred when the console is mounted in a desk or other
furniture. 10U rack space is required. Allow additional space
for access to the rear panel connectors.
easier access during operation. This position may also be
preferred when the console is mounted in a desk or other
furniture. 10U rack space is required. Allow additional space
for access to the rear panel connectors.
5 Rack Position 2 Shows the ears fitted for front of rack
mounting. The controls are flush with the rack and connectors
angled slightly back. 11U rack space is required. This allows
space for cables to be routed into the rack, and for the console
lamp to be accessed.
angled slightly back. 11U rack space is required. This allows
space for cables to be routed into the rack, and for the console
lamp to be accessed.
6 Ventilation and Cooling The console has a built-in mains
power supply. Although designed to run cool it is important
that adequate ventilation is provided.
that adequate ventilation is provided.
Do not obstruct the side ventilation slots or position
the console where air flow required for ventilation is
impeded. The console must not be operated in any carry or
flight case that obstructs these slots. Ensure adequate air
flow when rack or plinth mounting the console.
impeded. The console must not be operated in any carry or
flight case that obstructs these slots. Ensure adequate air
flow when rack or plinth mounting the console.
7 Console Lamp Plug in a 4-pin XLR 12V gooseneck lamp
designed for this purpose. The right angled type is
recommended. A low or high intensity bulb up to 400mA
maximum can be used. Only one lamp may be connected.
recommended. A low or high intensity bulb up to 400mA
maximum can be used. Only one lamp may be connected.