Allen & Heath ZED-10FX 用户手册
Allen & Heath 22 ZED-10FX User Guide
ZED-FX EFFECTS PROCESSOR
PARAMETER (HOLD)
TAP
SEL
16
8
5
6
7
15
14
13
2
3
4
12
11
10
1
9
Dly+verb (level)
Dly+verb (size)
Dly+verb (regen)
PingPong(regen)
BeatDly (regen)
Ambient (echo)
SlapVerb (size)
DoubleZED(size)
Plate (decay)
Plate (predly)
Plate (colour)
Hall1 (size)
Hall2 (size)
Arena (size)
Flanger (dpth)
Chorus (dpth)
Bank 9-16
TAP
AUX
+10
FX
FX to
Record
+6
0
Listen
LEVEL
0
Effects Type Selection LED.
8 Green LED’s show one of 16 effects types available. If the
Bank LED is off the green LED’s will show one of 1 to 8 on
the effects list (or off if no LED’s are lit), if the Bank LED is
on the green LED’s will show which of effects types 9 to 16
is selected. For effects types 1 to 5, the green LED will
blink in time with the tempo of the delay time.
The green LED’s also display the level of the parameter
adjustment when the TAP button is held down. The more
LED’s that illuminate, the more the parameter is increased
8 Green LED’s show one of 16 effects types available. If the
Bank LED is off the green LED’s will show one of 1 to 8 on
the effects list (or off if no LED’s are lit), if the Bank LED is
on the green LED’s will show which of effects types 9 to 16
is selected. For effects types 1 to 5, the green LED will
blink in time with the tempo of the delay time.
The green LED’s also display the level of the parameter
adjustment when the TAP button is held down. The more
LED’s that illuminate, the more the parameter is increased
in value or intensity.
Bank LED.
The Bank LED illuminates when one of the effects type 9 to
16 is selected. If the Bank LED is on, then the green LED
will show which effect is selected from the list.
The Bank LED illuminates when one of the effects type 9 to
16 is selected. If the Bank LED is on, then the green LED
will show which effect is selected from the list.
SEL Buttons.
The SEL buttons select the type of effect. They also adjust the pa-
rameter of the selected effect when the TAP button is held down.
The SEL buttons select the type of effect. They also adjust the pa-
rameter of the selected effect when the TAP button is held down.
TAP Button.
The TAP button is used in two ways. If one of effects types 1 to 5
are selected then the TAP button can be used for adjusting the
frequency or tempo of the delay parameter.
If the TAP button is held down, the SEL buttons then become pa-
rameter adjust buttons to increase or decrease the level of the
parameter assigned to the selected effect.
The TAP button is used in two ways. If one of effects types 1 to 5
are selected then the TAP button can be used for adjusting the
frequency or tempo of the delay parameter.
If the TAP button is held down, the SEL buttons then become pa-
rameter adjust buttons to increase or decrease the level of the
parameter assigned to the selected effect.
FX to AUX Send control.
This adds some of the effect to the Aux bus, so if the Aux is being
used for a monitor for a singer for example, the performer will be
able to hear their voice with some reverb added.
This adds some of the effect to the Aux bus, so if the Aux is being
used for a monitor for a singer for example, the performer will be
able to hear their voice with some reverb added.
Effects Level.
Controls the volume of the effects (wet) signal to the main stereo
Mix and the Record bus.
Controls the volume of the effects (wet) signal to the main stereo
Mix and the Record bus.
Listen
Switches the Effects (wet) signal to the headphones or monitor
output circuit for checking the effect.
Switches the Effects (wet) signal to the headphones or monitor
output circuit for checking the effect.
Record
Switches the Effects (wet) signal to the stereo Record bus.
Switches the Effects (wet) signal to the stereo Record bus.