Allen & Heath ZED-10FX 用户手册

 

      Allen & Heath                                              24                                ZED-10FX  User Guide 

L

R

+16

-6
-9

-20
-30

-16

-12

-3

0

+3

+6

+9

Aux

+10

LEVEL

+10

+6

Source

Playback

Mix

Phones

MAIN MIX 

OUT

AUX

OUT

FX

PHO

NES

 S

ELE

CT

0

0

LEVEL

AUX MIX 

LEVEL

LEVEL

Record

+10

0

0

Monitor

Phones

O/P Level

Switch

Main Mix Out XLR connectors 
Standard XLR output connectors for the main ste-
reo mix. Impedance balanced to aid interference 
rejection. A recessed switch on the rear panel re-
duces the level by 30dB if it is required to submix 
these outputs into the XLR inputs of another mixer. 

Main Mix Insert jack sockets 
Standard 1/4” (6.25mm) jack sockets wired: 
Tip = send, Ring = return, Sleeve = Chassis. Nominal 
level is 0dBu.  

Effects & Aux bus Outputs 
Standard 1/4” (6.25mm) jack sockets wired: 
Tip = hot, Ring = cold, Sleeve = Chassis. Nominal 
level is 0dBu.  
The FX out is the Effects bus output, (not the 
signal from the effects processor) and can be 
used for connecting to external equipment. 
The AUX out is taken from after the AUX MIX 
master level control. 

48v to Microphones 
Switches industry standard 48v (phantom power) 
to all 4 microphone inputs for use with con-
denser microphones. 

Monitor Level 
Controls the volume of the stereo monitor out-
puts from off (fully attenuated) to +10dB of gain. 

Monitor Source switch 
This allows the stereo monitor outputs (RCA 
phonos) to be sourced either from the headphone 
monitor selection, or from the main stereo mix. 
Useful for splitting the functions of the stereo moni-
tor outputs from the headphones. 

Aux Mix Level control 
The master volume control for the Aux mix bus. 
Adjusts the level from off (fully attenuated) to +6dB 
gain. 

Main Mix Level 
This is the master volume control for the main ste-
reo mix. Range is from off (fully attenuated) to 
+10dB of gain.